Vol 4 No 6 (2012): Mechanics, material science, industrial engineering and management / Mechanika, medžiagų inžinerija, pramonės inžinerija ir vadyba
Published: 2013-02-04
Article
A case study on biomass burning in Vaidotai settlement
Abstract 509 | PDF Downloads 653 | DOI https://doi.org/10.3846/mla.2012.83
Page 519-522
Modelling a compliant-based precise positioning stage
Abstract 480 | PDF Downloads 372 | DOI https://doi.org/10.3846/mla.2012.84
Page 523-527
Paper and prints as composite materials
Abstract 567 | PDF Downloads 550 | DOI https://doi.org/10.3846/mla.2012.85
Page 528-532
Reasearch on personnel management problems in industrial enterprises across Lithuania and the ways to suggest innovative solutions
Abstract 621 | PDF Downloads 1247 | DOI https://doi.org/10.3846/mla.2012.86
Page 533-536
Research into the influence of the acoustic field on the efficiency of removing aerosols
Abstract 469 | PDF Downloads 369 | DOI https://doi.org/10.3846/mla.2012.87
Page 537-540
Theoretical questions of applying smart materials for microactuators
Abstract 485 | PDF Downloads 443 | DOI https://doi.org/10.3846/mla.2012.88
Page 541-545
Research into Ni-Cr-Si-B coating sprayed onto aluminium substrate using the method of plasma spray
Abstract 492 | PDF Downloads 375 | DOI https://doi.org/10.3846/mla.2012.89
Page 546-549
Preperation for a clean surface
Abstract 716 | PDF Downloads 541 | DOI https://doi.org/10.3846/mla.2012.90
Page 550-554
Research on the durability of the splints of lower limbs
Abstract 501 | PDF Downloads 337 | DOI https://doi.org/10.3846/mla.2012.91
Page 555-558
Research on vibration isolation systems used in laser and nanotechnologies
Abstract 499 | PDF Downloads 377 | DOI https://doi.org/10.3846/mla.2012.92
Page 559-563
Optimization of grillages using genetic algorithms for integrating MatLab and Fortran environments
Abstract 536 | PDF Downloads 399 | DOI https://doi.org/10.3846/mla.2012.93
Page 564-568
Quality analysis of cutting steel using laser
Abstract 576 | PDF Downloads 370 | DOI https://doi.org/10.3846/mla.2012.94
Page 569-572
Research on machining prototypes using an industrial robot
Abstract 510 | PDF Downloads 380 | DOI https://doi.org/10.3846/mla.2012.95
Page 573-578
Influence of cutting parameters on the surface roughness and hole diameter of drilling making parts of alluminium alloy
Abstract 525 | PDF Downloads 513 | DOI https://doi.org/10.3846/mla.2012.96
Page 579-582
Investigation into the accuracy of colours reproduced by the ricoh printer
Abstract 502 | PDF Downloads 316 | DOI https://doi.org/10.3846/mla.2012.97
Page 583-587
Research on the effectiveness of aerators
Abstract 486 | PDF Downloads 419 | DOI https://doi.org/10.3846/mla.2012.98
Page 588-592
Research on dynamic parameters and position accuracy of pneumatics muscles
Abstract 511 | PDF Downloads 352 | DOI https://doi.org/10.3846/mla.2012.99
Page 593-598
Research on the influence of an acoustic field on particle cohesion in liquid
Abstract 506 | PDF Downloads 330 | DOI https://doi.org/10.3846/mla.2012.100
Page 599-603
Research on the properties of thermal sprayed Ni-Cr-Si-Fe-B coatings
Abstract 513 | PDF Downloads 314 | DOI https://doi.org/10.3846/mla.2012.101
Page 604-607