Vol 8 No 3 (2016)

Published: 2016-09-21

Articles

Plastic capacity of bolted RHS flange-plate joints under axial tension

Andrej Mudrov, Gintas Šaučiuvėnas, Antanas Sapalas, Ivar Talvik
Abstract 521 | PDF Downloads 863 | DOI https://doi.org/10.3846/2029882X.2016.1216806
PDF

Page 85-93

Numerical investigation of the elastic-plastic linear hardening stress-strain state of the frame element cross-section

Andrius Grigusevičius, Gediminas Blaževičius
Abstract 465 | PDF Downloads 367 | DOI https://doi.org/10.3846/2029882X.2016.1217796
PDF

Page 94-100

The impact of chain extender on the properties of polyurethane foam based on rapeseed oil polyol obtained via chemo–enzymatic route

Agnė Kairytė, Saulius Vaitkus, Giedrius Balčiūnas
Abstract 488 | PDF Downloads 976 | DOI https://doi.org/10.3846/2029882X.2016.1209726
PDF

Page 101-107

Production of lightweight concrete from waste tire rubber crumb

Joseph Olawale Akinyele, Ramhadhan Wanjala Salim, Williams Kehinde Kupolati
Abstract 566 | PDF Downloads 1239 | DOI https://doi.org/10.3846/2029882X.2016.1209727
PDF

Page 108-116

Modelling and experiment of buildings thermo-aeraulic behavior according to the level-compactness in Saharan climate conditions

Sidi Mohammed El Amine Bekkouche, Tayeb Benouaz, Maamar Hamdani, Mohamed Kamel Cherier, Mohamed Rédha Yaiche, Noceir Benamrane
Abstract 472 | PDF Downloads 400 | DOI https://doi.org/10.3846/2029882X.2016.1211492
PDF

Page 117-130